Table of Contents
Advertisement
ASSEMBLY
Stem Assembly
Stem fitted in the head tube with an expanding bolt (figure 1). Insert the stem into the head
tube, respecting the minimum insertion limit as indicated on the stem, and tighten the
expanding bolt to 18Nm. Important: Before tightening the stem, make sure that it is in-line
with the front wheel.
Figure 1
Handlebar Assembly
Position the handlebar inside the stem (figure 2). Respecting assembly indications on the
handlebar, tighten screw to 18Nm. Before completely tightening, check that the handlebar,
the brake levers and shifter are correctly positioned.
Figure 2
Advertisement
Table of Contents
