Table of Contents
Advertisement
SAFETY & WARNINGS
Electric Assisted Bike Regulations
The EN 15194 EU standard or EPAC (Electric Power Assisted Cycle) conforms to the following
characteristics for electric power assisted bikes:
•
Motor assistance only starts when the cyclist pedals.
•
The assistance cuts out as soon as the cyclist stops pedalling.
•
The assistance cuts out as soon as the speed exceeds 25km/h.
Adherence to this standard enables the use of the electric bikes in the same conditions as
any other bicycle, particularly on bicycle paths and bicycle-specific lanes.
Recommendation Before First Ride
•
Before first use, please double-check the function of all the parts of your electric
bike. If you have any doubts or if you detect a problem, please contact your
authorised dealer or technical service department.
•
If you lend your bicycle to a third party, please give them this instruction manual
with the bicycle and request that they read it before the first ride.
•
Respect local and national road traffic regulations.
•
For your safety, it is highly recommended that you wear a certified helmet.
•
When used during heavy rain, snow, in slippery conditions or in the case of low
visibility, be careful and adjust your speed.
•
At night, ride using the lights.
•
Trying to repair anything that implies removing technical or electrical components
is strongly advised against. If necessary, please contact your dealer's after-sales
service.
•
The manufacturer declines any responsibility due to overloading or items that are
not correctly attached to the baggage rack.
•
Using high pressured water jets to clean the bike is strongly advised against.
•
Check the battery level before use. You must fully charge it before first use.
Advertisement
Table of Contents
