Using Your Refrigerator; Temperature Control And Adjustment - Beko RCF582W Manual

5

Using your refrigerator

Temperature Control And Adjustment

Operating temperatures
controlled by the thermostat (see
diagram) located on the ceiling of
fridge compartment. Settings may be
made from min, 1 ... 6, max, max being
the coldest position.
When the appliance is switched on
for the first time, the setting should
be adjusted so that after 24 hours,
the average fridge temperature is
no higher than +5°C (+41°F). We
recommend you set the thermostat
half way between the min and max
setting and monitor to obtain the
desired temperature i. e. towards
max you will obtain a colder fridge
temperature and vice versa. Some
sections of the fridge may be cooler or
warmer ( such as the salad crisper and
the top part of the cabinet ) which is
quite normal.
The normal storage temperature
of the freezer should be -18°C (0°F).
Lower temperatures may be obtained
by adjusting setting towards max
position.
are We recommend that you check
the temperature with an accurate
thermometer to ensure that the
storage compartments are kept to the
desired temperature.
Remember you must take your
reading very quickly since the
thermometer temperature will rise
very rapidly after you remove it from
the appliance.
Please remember each time the
door is opened cold air escapes
and the internal temperature rises.
Therefore never leave the door open
and ensure it is closed immediately
after food is put in or removed.
In case of a temporary ice build up in
the fridge compartment, reduce the
thermostat setting to 1, monitoring
at the same time that the fridge
temperature is maximum +5
degreesC [41 degrees F]. Once the
ice build up disappears and the
appliance starts auto defrosting again
as normal,then you may increase the
thermostat setting, if required.
18
EN