Table of Contents
Advertisement
Replacing The Interior
Light Bulb
Should the light fail to work, proceed
as follows.
1. Switch off at the socket outlet
and pull out the mains plug.
2. You may find it useful to
remove shelves for easy access.
3. Use a flat tipped screwdriver
to remove the light diffuser cover by
inserting the blade in each of the two
recesses to prise off each side.
4. First check that the bulb
hasn't worked loose by ensuring it
is screwed securely in the holder.
Replace the plug and switch on. If the
bulb works, replace the light cover by
inserting the rear lug and pushing up
to locate the front two lugs.
5. If the light still fails to work,
switch off at the socket outlet and
pull out the mains plug. Replace the
bulb with a new 15 watt (max) screw
cap (SES) bulb.
6. Carefully dispose of the
burnt-out light bulb immediately.
Replacement light bulb can easily be
obtained from a good local electrical
or DIY store.
13
EN
Advertisement
Table of Contents
