Process Data (Monitoring) - WEST PAM-190-P Series Technical Documentation Manual

5.6 PROCESS DATA (Monitoring)

Command
W
C
U
IA
The process data are the variables which can be observed continuously on the monitor or on the oscilloscope.
5
The display of the solenoid current (in WPC-300 program) is damped in order to be able to bring out a stable signal.
Page 22 of 24
Description
Command value after input scaling
Comman value after ramp function
Control signal
5
Solenoid current
PAM-190-P-A/I
Unit
%
%
%
mA
05.06.2020