Characteristics - WEST PAM-190-P Series Technical Documentation Manual

2 Characteristics

This amplifier plug is used to control proportional valves with one solenoid. The compact and inexpensive so-
lution will be mounted directly on the solenoid.
A typical input signal of 0... 10 V (optional 4... 20 mA) can be used. The output current is closed loop con-
trolled and therefore independent from the supply voltage and a varying solenoid resistance.
The parameterization can be done via the PC interface and the ULA-310 adapter or internally via the UP and
DOWN buttons.
By the free parameterization of the amplifier plug all typical proportional valves of the different manufactures
can be optimal adapted.
Typical applications: Controlling of the solenoid of proportional throttle or pressure valves.
Features

Power amplifier for proportional valves located in a DIN EN 175 301-803-A plug housing

Digitally reproducible adjustments

Free scaling of the input signal

Also usable as Soft-Switch-amplifier (soft switch-on and switch-off)

M12 connector

Programmable via USB/LIN bus

Free parameterization of ramps, MIN and MAX, DITHER (frequency, amplitude) and
PWM frequency

Parameter settings via integrated buttons and a selector switch (reduced functionally against the
USB / LINbus)

Optional: Version with CAN-Bus on request

Output current 1 A / 2.5 A

Adaptable to all standard proportional valves
Page 6 of 24 PAM-190-P-A/I 05.06.2020