Sears CRAFTSMAN C950-52725-0 Owner's Manual page 16

Traction Drive
Clutch Lever
Disengaged
E n g a g e d
WHEEL LOCK OUT PIN
1. The right wheel is secured to the axle with a klick pin.
This unit was shipped with this klick pin in the locked
position (see Figure 17).
2. For ease of maneuverability when lighter conditions pre-
vail, remove klick pin from wheel locked position and in-
sert into single wheel drive (unlocked) position (see
Figure 18). Make sure that the klick pin is in the single
wheel drive position of the axle only and not through the
locked position.
NOTE: Check tire pressure. See side of tire for maximum
inflation. Do not exceed listed maximum pressure.
1741613
OPERATION
Auger Drive
Clutch Lever
Disengaged
E n g a g e d
Figure 16
8. To stop forward motion, release traction drive clutch lever
(left hand − Figure 16).
9. To stop auger, release auger drive clutch lever (right
hand − Figure 16).
10. To move the snow blower backwards, move speed select
lever into first or second reverse and engage traction
drive clutch lever (left hand). To stop, release traction
drive clutch lever.
Locked
Position
Single Wheel
Drive Position
(Unlocked)
16
Klik Pin
Figure 17
Klik Pin
Figure 18