Korg D32XD Upgrade Manual page 10

6. SnapShot
Pressing this button when "4. Automation" is on and the
recorder is stopped will record a "snapshot" of events for
channels whose record channel button is set to
7. Undo
Press this if you want to revert the recorded automation
to the state prior to the previous operation. If the button
indicates Redo, you can use it to cancel the Undo.
You can use "3c-3. Event List" to make detailed changes to
the recorded events.
This data is held in common with the "8. Undo" data of "3c-
3. Event List." If you press the Event List's Undo button
immediately after recording automation, that automation data
will be erased, and not the most recent event edit.
8. Free event memory amount
This indicates the amount of remaining memory in which
you can record events.
3c-3. Event List
Here you can view and edit the events and scenes that you
recorded using automation.
2
3
1. Set View
Press this button to open the Set View dialog box. Press
the OK button to apply your selections, or press the Can-
cel button to cancel them.
1a
1a.Event View Source
Press a radio button to choose the parameter that will
appear in the event view.
1b.Time Resolution / dot
Specify the range that will appear in the event view. The
range shown will be the time you specify here x 192.
2. Event view
This area shows the events of the type you selected in Set
View.
10
(Rec).
1
4
5
6
7
8
9
1b
[0.05, 0.1, 0.2, 0.5, 1sec]
3. Event list
Displays the events selected in the "9. Select List." To edit
an event, select (highlight) it by pressing it in the list.
If D32XD data containing Aux 3 and 4 events is loaded into
the D16XD, the Aux 3 and 4 events will always be displayed
in the event list. You can select and edit these events in the
same way as for other parameters.
4. Edit
Press this button to open the Edit Event dialog box.
4b
4a. Event select button
Use this to select the event you want to edit. Press this
button and use the value dial (or +/– keys) to select
the event you want to edit.
4b. Parameter/Parameter value [MIDI value]/Location
Select (highlight) the parameter or location that you
want to edit, and use the value dial (or +/– keys) to
edit it.
The only way to edit a scene is to change its location.
The values will not be updated until you press the OK
button to confirm your edits.
When editing Aux 3 and 4 (parameter) events loaded in from
a song from a D32XD, do not change the parameter. If you
do, you will be unable to return them to Aux 3 and 4.
5. Cut
Press this button to open the Cut Event dialog box.
The selected event will be cut (deleted) from the event
list. However, the event itself will be temporarily saved
in the edit buffer (clipboard).
To execute the cut, press the Yes button. To cancel, press
the No button.
To cut all events in the event list, press (highlight) the
Select All button and then execute Cut.
6. Copy
Press this button to open the Copy Event dialog box.
The selected event will be copied temporarily to the edit
buffer (clipboard).
To execute the copy, press the Yes button. To cancel, press
the No button.
To copy all events in the event list, press (highlight) the
Select All button and then execute Copy.
7. Paste
Press this button to open the Paste Event dialog box. The
event temporarily saved in the edit buffer (clipboard) will
be pasted following the selected event.
To execute the paste, press the Yes button. To cancel, press
the No button.
4a