Adjusting Your Monitor Image; Using Direct Access Controls - Lenovo ThinkVision P34w-20 WQHD User Manual

Adjusting your monitor image

Using direct access controls

This section describes the control features to adjust your monitor images�
Direct access controls can be used when the On-Screen Display (OSD) is not displayed�
Icon Name
One Key Switch
1
DDC-CI
Exit
Input Source
2
Increase/Up
Brightness
3
Decrease/Down
Menu
4
Enter
*Note:
One Key Switch: Press and select "1" to be Type C port USB-C function�
Press and select "2" to be HDMI/DP port USB-B function�
Description
Select "1" is Type C port USB-C function�
Select "2" is HDMI/DP port USB-B function�
Press and hold for 10 seconds to enable or disable the
DDC-CI function�
Exit and return to the previous level�
Switch the video input source�
Shift back to the previous level when in OSD mode�
Press to move the main menu cursor up from the active
item to the last one�
Press to increase current values on the adjustment bar�
Direct access to Brightness adjustment�
Press to move the main menu cursor down from the active
item to the next one�
Press to decrease current values on the adjustment bar�
Access the OSD menu�
Press to confirm selection�
Press and hold for 10 seconds will lock/un-lock the menu�
Press to enter the next level on the main menu/sub menu
status or enter the previous level on the adjustment bar�
Chapter 2� Adjusting and Using your monitor 2-3