Setting Up Your Monitor; Connecting And Turning On Your Monitor - Lenovo ThinkVision P34w-20 WQHD User Manual

Setting up your monitor

Connecting and turning on your monitor

This section provides information on how to set up your monitor�
Note: Before performing this procedure, be sure to read "Safety Information" on page iv�
1� Power off your computer and all attached devices, then unplug the computer power cord�
2� Connect the cables as shown below�
Connectors:
1 x Power
2 x HDMI 2�0
1 x DisplayPort 1�2 in
1 x DisplayPort 1�2 out
1 x USB-B 3�2 Gen 1 (upstream)
1 x USB-C 3�2 Gen 1 (upstream)
1 x USB-C 3�2 Gen 1 (downstream)
3 x USB-A 3�2 Gen1 (downstream): one of USB-A support eKVM
1 x RJ-45 (10M/100M/1G)
1 x Audio Out
Chapter 1� Getting started 1-3