Table of Contents
Advertisement
Manually installing the monitor driver
Below are steps for manually installing the monitor driver in Microsoft Windows 7, Microsoft
Windows 10�
Installing the monitor driver in Windows 7
To use the Plug and Play feature in Microsoft Windows 7, do the following:
1�
Turn off the computer and all attached devices�
2�
Ensure that the monitor is connected correctly�
3�
Turn on the monitor and then the system unit� Allow your computer to start the Windows 7
operating system�
4�
From the Lenovo website https://pcsupport�lenovo�com/solutions/p34w_20, find the
corresponding monitor driver and download it to a PC to which this monitor is connected
(such as a desktop)�
5�
Open the Display Properties window by clicking Start, Control Panel and Hardware and
Sound icon� and then clicking the Display icon�
6�
Click the Change the display settings tab�
7�
Click the Advanced Settings icon�
Click the Monitor tab�
8�
Click the Properties button�
9�
10� Click the Driver tab�
11� Click Update Driver, then click Browse the computer to find the driver program�
12� Select Pick from the list of device driver program on the computer�
13� Click the Hard Disk button� By clicking the Browse button, browse and open the following
path:
X:\Monitor Drivers\Windows 7
(where X indicates "the folder in which the downloaded driver is located" (such as a desktop))�
14� Select the "P34w-20.inf" file and click the Open button� Click the OK button�
15� In the new window, select P34w-20, and click Next�
16� After the installation is completed, delete all downloaded files and close all windows�
17� Restart the system� The system will automatically select the maximum refresh rate and
corresponding Color Matching Profiles�
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality� Lenovo
recommends using either 3440 x 1440 at a refresh rate of 60 Hz, or 1920 x 1080 at a refresh rate of
60 Hz�
Chapter 3 Reference information 3-5
Hide quick links:
Advertisement
Table of Contents
