Epson PowerLite TW-100 User Manual page 62

Adjust the
Sharpness
When you change video settings, you should be able to see the
effect on the screen immediately. If you're projecting from a
computer, you may also need to adjust the tracking and sync as
described in the next section. If you don't like the new settings,
you can always select
settings.
Make sure the input signal matches the connected source. Check
the settings for the
in the Advanced menu. (See page 33 for more information.)
If a computer is connected to the projector, make sure the correct
resolution is selected. See your computer documentation.
You see vertical stripes or the image still looks blurry after
trying the solutions in the previous section.
If you're projecting from a computer and displaying an image that
contains a lot of fine detail, you may notice one or more vertical
stripes or bands, or some of the characters may look heavy or
blurred. Press the
Auto
the projector's tracking and sync settings.
If further adjustment is needed, you can fine-tune the
and settings manually using the Video menu as described
Sync
on page 31.
The colors of the image are not right.
Select a different color mode by pressing the
on the projector or remote control or selecting the
option in the Video menu.
To increase or reduce contrast, try adjusting the
in the Video menu.
White Level
If you're displaying video, adjust the
menu.
Adjust the color contrast with the
the Video menu.
setting on the Video menu (see page 30).
to return to the factory default
Reset
,
Video Signal Input A
button on the remote control. This resets
Color
Color Adjustment
, and options
Input B
Tracking
button
Colortune
Color Mode
and
Black Level
or in the Video
Tint
option in
note
Because of the different
technologies used, your
projected image may not
exactly match the colors on
your laptop or computer
monitor.
Solving Problems
57