Epson PowerLite TW-100 User Manual page 40

3. Use the , ,
button on the remote control to set the following options:
Select
Keystone
Corrects keystone distortion of the image. This procedure
makes the image smaller. If the image looks uneven after you
adjust the shape, decrease the Sharpness setting (see page 30).
No-Signal Msg.
Selects a screen color (blue or black) to display when the
projector is not receiving a signal. (The logo setting displays
the EPSON logo.)
Startup Screen
Turn on this option to display the EPSON logo whenever the
projector starts.
Blank
Selects the screen color to display (blue or black) when you
press the
Blank
EPSON logo.)
Sleep mode
When sleep mode is on, the projector turns off the lamp if it
has not received any input signals for the specified amount of
time (1, 5, or 10 minutes). The default setting is
Projection
Selects the projection method, as follows:
Setting
Front
Front/Ceiling
Rear
Rear/Ceiling
Language
Select from 9 languages to be used for the projector menus.
4. When you're finished, press
, or buttons on the control panel or the
button. (The logo setting displays the
Projector position
Projector is in front of the screen
Projector is in front of the screen,
mounted upside-down from the ceiling
Projector is behind the screen
Projector is behind the screen, mounted
upside-down from the ceiling
or
Esc Menu
.
OFF
.
Fine-tuning the Projector
35