Epson PowerLite TW-100 User Manual page 14

5. Turn on the main power switch on the back of the projector.
The P power light on top of the projector flashes orange, and
then stays orange.
6. Turn on the power to any equipment connected to the projector.
7. Press the button on the remote control or the top of the
Power
projector.
Green
The P power light flashes green as the projector warms up, and
the projection lamp comes on in about 15 seconds. The power
light stays green, and you may see a blue screen with the
message displayed. This is normal.
Signal
Orange
note
The projector will not
respond to any buttons on the
control panel or remote
control while the power light
is flashing orange or green.
warning
Never look into the lens when
the lamp is on. This can
damage your eyes, and is
especially dangerous for
children.
No
Using the Projector
9