Epson PowerLite TW-100 User Manual page 58

Check the settings for the
options in the Advanced menu to make sure they are correct for
the input source. (See page 33.)
If you're using a PC laptop:
Press the function key that lets you display on an external
monitor. It's often labelled with an icon such as
also be labelled
CRT/LCD
while pressing it. Check your laptop's manual or online help for
details.
On most systems, the
screen and the projector, or display on both at the same time.
Allow a few seconds for the projector to sync up after pressing it.
Depending on your computer's video card, you might need to use
the Display utility in the Control Panel to make sure that both the
LCD screen and external monitor port are enabled. See your
computer's documentation or online help for details.
If you're using a Macintosh laptop with OS 9.x or earlier:
1. From the Apple menu, select
Monitors and Sound.
2. Click the
Arrange
of the other.
Click here
Drag one monitor
icon on top of
the other
,
Video Signal Input A
. You may have to hold down the
key lets you toggle between the LCD
Control Panels
icon, and then drag one monitor icon on top
, or
Input B
, but it may
key
Fn
, then click
note
If the option isn't
Arrange
available, you may need to
select one of the Simulscan
resolution settings. Click the
icon and then select
Monitor
a Simulscan resolution from
the ones in the Resolution
box. (Allow a few seconds for
the projector to sync up after
making the selection.)
Solving Problems
53