Table of Contents
Advertisement
1.
Remove all components from the carton.
2.
Attach the Motor Bracket on the outside of the right grill bowl panel. Align the two holes of
the Bracket with the threaded holes on the grill bowl. Tighten securely using two Rot. Screws
No.10-24 x 3/4" UNC, Flat Washers and Nuts provided.
Rot. Screw #10-24x3/4" UNC x2
Rot. Washer x2
Rot. Nut #10-24 x2
3.
Slide a Holding Fork onto each end of the Rotisserie Spit. Adjust spacing between Holding Fork
to accommodate your food, then tighten the Thumbscrews to keep the Holding Forks in position.
Slide the Rot.Collar onto the end of the Spit on the opposite side of motor.
Roti. Collar until the Rotisserie is placed into your grill.
Rot.Thumbscrew 1/4"x1/2" x2
Rotisserie Instructions
#10-24 Nut.
Spit
21
Washer
Holding Forks
Rot.Collar
Motor Bracket
Rot. Screw#10-24x3/4"
UNC with
washers and nuts
Outside of r i ght
grill bowl panel
Do not tighten the
Thumbscr ew
1/4"x1/2"
Advertisement
Table of Contents
