Table of Contents
Advertisement
Cart Assembly Instructions
Remove all cart parts, hardware, and Grill Head from
shipping boxes. Raise the Grill Lid and remove all
packed components. Use the parts list to check that
all necessary parts have been included.
Assemble the gas grill on a protective work surface
to avoid scratching grill surfaces. Inspect your grill for
damage as you proceed. Do not assemble or operate
your grill if it appears damaged.
Assembling The Cart
1.
Position bottom shelf with tank toward the left
side.See Figure 1.
Note: The label on the cart legs indicate their
assembly position to the bottom shelf. LF=Left
F r o n t , L R=L ef t Rea r, RF = Rea r Fr o n t , an d
RR= Right Rear. Labels should face inward
toward each other when correctly assembled.
Remaining components cannot be assembled if
leg postions are incorrect.
2.
Install the four cart legs to the indicated corners
of the bottom shelf using 8 of the 1/4" x 2-1/2"
Phillips Head screws provided. Do not fully tighten
screws.
1/4" x 2-1/2" Phillips Head Screw x 8
3.
Screw the 4 Casters into the caster seats in the
bottom of each cart leg. Turn the threaded caster
stem by hand,
clockwise until it stops.
with the wrench provided. See Figure 2.
4.
Install the two Cart Side Panels to the cart by using
4 of the 3/16" x 3/8" Phillips Head screws on each
panel. Leave side panel screws loose. See Figure
3.
3/16" x 3/8" Phillips Head Screw x 8
5.
Install the Cart Rear Panel to the cart
by using 4 of the 3/16" x 3/8" Phillips Head screws.
3/16" x 3/8" Phillips Head Screw x 4
Figure 1
CART LEG
(LF)
Figure 2
CASTER
Fully tighten
Figure 3
CART SIDE
PANEL
11
CART LEG
(LR)
CART LEG
(RR)
BOTTOM
SHELF
CART LEG
(RF)
CART REAR
PANEL
Advertisement
Table of Contents
