Table Of Contents; General Safety Instructions - QEP 700XT Owner's Manual

TABLE OF CONTENTS

General safety instructions . . . . . . . . . . . . . . . . 1
Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Electrical requirements . . . . . . . . . . . . . . . . . . . 3
Extension cords . . . . . . . . . . . . . . . . . . . . . . . . . . 4
California Proposition 65 . . . . . . . . . . . . . . . . . . 4
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . 10
Parts list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Exploded parts diagram . . . . . . . . . . . . . . . . . . 11
GENERAL SAFETY
INSTRUCTIONS
MANUAL COMPLETELY AND MAKE
SURE YOU UNDERSTAND ALL OF IT'S
SAFETY GUIDELINES.
1 . KEEP GUARDS IN PLACE and in
working order .
2 . REMOVE ADJUSTING KEYS AND
WRENCHES. Before turning on the tile saw,
make sure the keys and adjusting wrenches
have been removed .
3 . KEEP WORK AREA CLEAN. Cluttered areas
and benches invite accidents .
4 . ALWAYS REMAIN ALERT WHEN THE SAW
IS IN USE. Inattention on the part of the
operator may lead to serious injury .
5 . DON'T USE IN A DANGEROUS
ENVIRONMENT . Don't use power tools in
damp or wet locations or expose them to rain .
Keep work area well lit .
6 . KEEP CHILDREN AWAY. All visitors should
remain at a safe distance from work area .
700XT 7" TILE WET SAW
WITH EXTENSION TABLE
OWNER'S MANUAL
READ THIS OWNER'S
7 . MAKE WORKSHOP CHILD-PROOF with
padlocks, master switches or by removing
starter keys .
8 . USE THE RIGHT TOOL. Don't force a tool
or attachment to do a job for which it was
not designed .
9 . USE THE PROPER EXTENSION CORD. Make
sure your extension cord is in good condition .
When using an extension cord, be sure to use
one heavy enough to carry the current your
product will draw . An undersized cord will
cause a drop in line voltage resulting in loss
of power and overheating . TABLE 1 (page 4)
shows the correct size to use depending on
cord length and nameplate ampere rating .
If in doubt, use the next heavier gauge .
The smaller the gauge number, the heavier
the cord .
10 . DON'T FORCE THE TOOL. It has been
designed to operate at maximum safety and
performance levels .
11 . DO NOT FORCE THE MATERIAL BEING CUT.
Always let the blade cut at its own speed .
12 . WEAR PROPER APPAREL. Do not wear
loose clothing, neckties, rings, bracelets or
other jewelry which may get caught in moving
parts . Non-slip foot wear is recommended .
Wear protective hair covering if you have
long hair .
13 . ALWAYS USE SAFETY GLASSES. Also
use face or dust mask for commercial cutting
operations . Everyday eyeglasses only have
impact-resistant lenses, they are NOT
safety glasses .
14 . DON'T OVERREACH. Keep proper footing
and balance at all times .
15 . MAINTAIN TOOLS WITH CARE. Keep
tools clean and in good working condition for
maximum safety performance .
16 . DISCONNECT SAW BEFORE SERVICING -
when changing accessories, such as blades,
bits, cutters, etc .
- 1 -