Advertisement
plate in the same manner in less than 15 minutes. (They automatically exit house
code mode after 30 minutes).
INSERT RF MODULE BY PLUGGING IN PINS & ALSO INSERT ITS ANTENNA IN THE HOLE
PROVIDED - HOLD BY PULL TAG AND GENTLY PUSH UNTIL FULLY INSERTED
PULL TAG
7. When in the House Code mode, the blue light (on the front of the Alarm - see
figure 2b) will flash a number of times every 5 seconds to indicate:
(a) that the Alarm is in House Code mode,
and
(b) the number of Alarms that have been identified and added to your system.
For example with 3 Alarms in your system, you should see 3 blue light flashes every
5 seconds, with 4 Alarms in your system you should see 4 blue light flashes and so
on, (with the 10th unit, the blue flash is longer, to help with the counting).
LED
ANTENNA
ANTENNA HOLE
4
Figure 1
Advertisement
