Maintenance; Recommended Maintenance Schedule(S); Maintenance Safety - Toro 54610 Operator's Manual

Maintenance

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 5 hours
Before each use or daily
After each use
Every 50 hours
Every 200 hours
Yearly
Yearly or before storage
Important:
Refer to your engine owner's manual for additional maintenance procedures.

Maintenance Safety

•
Always shut off the machine, wait for all moving
parts to stop, allow the machine to cool, and
disconnect the spark-plug wire from the spark plug
before adjusting, servicing, cleaning, or storing it.
•
Wear gloves and eye protection when servicing
the machine.
•
The blades are sharp; contacting the blade can
result in serious personal injury. Wear gloves
when servicing the blades. Do not repair or alter
the blades.
•
Never tamper with safety devices. Check their
proper operation regularly.
•
Tipping the machine may cause the fuel to leak.
Fuel is flammable and explosive, and can cause
personal injury. Run the engine dry or remove the
fuel with a hand pump; never siphon the fuel.
•
To ensure optimum performance of the machine,
use only genuine Toro replacement parts and
accessories. Replacement parts and accessories
made by other manufacturers could be dangerous,
and such use could void the product warranty.
Maintenance Procedure
• Change the engine oil.
• Check the engine-oil level and add oil as needed.
• Check the air filter and clean or replace it, if necessary.
• Check the cutting blades.
• Clean scarifier debris and dirt from under the machine.
• Clean the air filter; clean it more frequently in dusty operating conditions.
• Change the engine oil.
• Replace the air filter; replace it more frequently in dusty operation conditions.
• Service the air filter; service it more frequently in dusty operating conditions.
• Change the engine oil.
• Inspect the blades.
• Empty the fuel tank before repairs as directed and before yearly storage.
17