Table of Contents
Advertisement
ASSEMBLY INSTRUCTIONS (Continued)
1. CONNECT WIRING
A. Follow all local electrical code and ANSI/NFPA70.
B. NEVER place a switch where it can be reached
from a tub or shower.
C. Remove the fan junction box cover. Using wire
nuts (not supplied) connect house wires to fan
wires as shown in the wiring diagram on page 4.
Wire connections are as follows: black and blue
to live switch wire, white to neutral, green to ground.
Reattach fan junction box cover.
2
14AWG (2.1mm ) is the smallest conductor that
D.
shall be used for branch-circuit wiring.
2. GLASS SHADE INSTALLATION
1. Insert the LED lighting connecting into the LED
socket.
2. Insert the rod through center hole of LED module
and mount into the grille bracket.
3.Place glass shade over mounting rod. Secure glass
shade with cap and finial nut.
OPERATION
Turn POWER switch on to operate the fan/LED light on.
1
1
2
7
b
LED lighting connecting
Finial nut
Model:
GBR100LED-DECOR
Advertisement
Table of Contents
