Before Calling For Service - Daewoo mini User Manual

Before calling for service

- Press the button(power) to suspend the operation of washer and then examine the following items.
- Press the button(power) again to resume operation.
Problem/Display
Washer is not No display
operating.
Water supply
is unavailable.
Water drainage
is unavailable.
Washer is not
operating.
Drum is not
spinning.
Water is not
adjustable.
Other troubles
without error
- If LE error is displayed on the LED panel, please open and close the door.
- If LE error continues to take place, please turn off and restart the washer.
Note
미니(1.5)_DWD-CV702WP(영).indd 28
- Is the power cord correctly connected to an electric outlet?
- Is the power supply on?
- Did you press the Start/Pause button?
- Is there a power failure?
- Did the circuit breaker cut the power supply?
- Is the tap turned on?
- Is the drainage hose filter clogged with dirt?
- Is inlet hose frozen?
- Is the water supply cut off?
- Did you put down the drain hose properly?
- Is the outlet of drain hose closed as it is inserted deep into the drain?
- Is the drain hose bent?
- Is the drain hose placed too high?
- Is the drain clogged with dirt and threads?
- Is there excessive dirt inside the drain filter?
- Is the door open?
- Is the door end closed tightly?
- Contact your local service center.
- Contact your local service center.
- Do not touch or disassemble the inner parts when you have not identified any problems
with the checkpoints above. Contact your local service center after unplugging the washer
displays
and turning off the faucet.
28
|
Checkpoints and Solutions
|
2017-11-24 오후 6:37:31