Electrolux ESL7550RO User Manual page 11

Level 0 deactivates the rinse aid
dispenser and no rinse aid is released.
Factory setting: level 4.
How to set the rinse aid level
Make sure the appliance is in user mode.
1. Press .
• The indicators
are off.
• The indicator
flash.
• The display shows the current
setting: e.g.
– The levels of rinse aid range
from 0A to 6A where level 0A
means rinse aid is not used.
2. Press repeatedly to change the
setting.
3. Press on/off to confirm the setting.
6.5 Acoustic signals
Acoustic signals sound when a
malfunction of the appliance occurs. It is
not possible to deactivate these acoustic
signals.
There is also an acoustic signal that
sounds when the programme is
completed. By default this acoustic signal
is deactivated but it is possible to
activate it.
How to activate the acoustic
signal for the end of
programme
Make sure the appliance is in user mode.
1. Press .
• The indicators
are off.
• The indicator
• The display shows the current
setting:
2. Press to change the setting.
= Acoustic signal on.
3. Press on/off to confirm the setting.
, , and
continues to
= level 4.
, , and
still flashes.
= Acoustic signal off.
6.6 AirDry
AirDry improves the drying results with
less energy consumption.
While the drying phase
operates, a device opens the
appliance door. The door is
then kept ajar.
CAUTION!
Do not try to close the
appliance door within 2
minutes after automatic
open. This can cause
damage to the appliance.
CAUTION!
In case of presence of
children, the AirDry system
can be deactivated if you
want to keep the door closed
in the end of the cycle.
To improve the drying performance refer
to the XtraDry option or activate AirDry.
How to deactivate AirDry
Make sure the appliance is in user mode.
1. Press .
• The indicators
are off.
• The indicator
• The display shows the current
setting: = AirDry activated.
2. Press to change the setting:
= AirDry deactivated.
3. Press on/off to confirm the setting.
ENGLISH 11
, , and
still flashes.