Removing The Wireless Lan Module - Clevo W270HUQ Series Service Manual

Disassembly

Removing the Wireless LAN Module

Figure 10
Wireless LAN
1. Turn off the computer, turn it over, and remove the battery
Module Removal
2. The Wireless LAN module will be visible at point
3. Carefully disconnect the cable
a. Locate the WLAN.
4. The Wireless LAN module
b. Disconnect the cable
and remove the screw.
c. The WLAN module will
a.
pop up.
d. Remove the Wireless
LAN module.
Note: Make sure you
reconnect the antenna
cable to the "1 + 2"
socket (Figure 11b).
b.

4.Wireless LAN Module
• 1 Screw
2 - 14 Removing the Wireless LAN Module
(page 2 -
on the mainboard
1
, and then remove the screw
2
(Figure 11c) will pop-up, and you can remove it from the computer
4
c.
1
d.
3
2
5) and the component bay cover
(Figure 11a).
(Figure 11b) .
3
4
(page 2 - 9).
(Figure 11d).
4