Clevo W270HUQ Series Service Manual page 41

12. Run your fingers around the inner frame of the LCD panel at the points indicated by the arrows
13. Lay the computer down on a flat surface with the top case up forming a 90 degree angle. Push the LCD front
panel upwards before carefully lifting it up.
61
14. Disconnect cable .
62
15. Remove the CCD module
63
k.
57
60
59
l.
.
m.
58
n.
61
- .
57 60
62
63
Removing the Keyboard/CCD 2 - 17
Disassembly
Figure 13
Keyboard / CCD
Removal
k. Run your fingers around
the inner frame of the
LCD panel at the points
indicated by the arrows.
l. Lay the computer down
on a flat surface with the
top case up forming a 90
degree angle. Push the
LCD front panel upwards
before carefully lifting it
up.
m.Disconnect the cable.
n. Remove the CCD mod-
ule.

61. LCD Front Panel
63. CCD Module