To Use The Stop Watch - Optimum Time Ultimate Event Instructions Manual

13 Press ADJUST to confirm and start the date flashing.
14 Press START/STOP to adjust between European date order (date, month, year), or American date
order (month, date, year).
15 Press either SET to confirm all your choices and exit the time setting mode or press MODE to go
back to stage 2 above and repeat the process.
16 If you have pressed SET to confirm the clock and calendar are now set.
NOTES
1 You can confirm your changes at any time using the SET button without having to go through the
whole sequence.
2 You can move a digit on by giving a single press or you can fast scroll through by holding the button
down.

TO USE THE STOP WATCH

1 Press MODE to enter the stop watch function.
2 Choose between large stop watch/small time or small stop watch/large time using either SET button.
(The stop watch has the letters SW before the display and the time has a clock icon before it).
3 Press START/STOP to either start or stop the stop watch. This counts up only, and counts in hours,
minutes, and seconds.
4
4 To clear the stop watch make sure it is stopped and then press ADJUST.
5 Whether the stop watch is running or not you can choose whether you want the stop watch or the
clock on the large digits by pressing SET.
6 The minute alarm will sound at every minute during count up if the icon in the top right of the display
is on.
7 To activate the minute alarm, stop the stop watch and zero it.
8 Press ADJUST and hold it down for 2 seconds until you hear a 'beep' which will either have turned
the minute alarm on or off depending on its previous state.
TO SET THE ALARM 1 AND THE HOUR STRIKE
1 Press the MODE button to access the ALARM 1 display. (The letters SW will not be visible
because you are not in stop watch mode, but Alarm 1 will show because you are in the alarm 1
mode).
2 Press the SET button and hold it down for 2 seconds. You will hear a 'beep' and the hours will be
flashing.
3 Press ADJUST to alter the hour making sure if you are in 24 hour mode that you are not 12 hours
wrong!
4 Press MODE to confirm and start the minutes flashing.
5 Press ADJUST to alter the minutes.
5