Optimum Time Ultimate Event Instructions Manual page 3

ALARM 1
SW
24HR
AM PM
SW
Endurance
SET
SET
EL
2
START
STOP
START
STOP
ALARM 2 MIN
Wa t c h
ADJUST
MODE
ADJUST
EL
MODE
TO SET THE TIME AND CALENDAR ON THE WATCH
1 Press the MODE button to access the time and calendar display. (The letters SW will not be visible
because you are not in stop watch mode, nor will either of the words Alarm 1 or Alarm 2 show
because you are not in the alarm modes).
2 Press the SET button and hold it down for 2 seconds. You will hear a 'beep' and either AM, PM or
24HR will be flashing.
3 Press ADJUST to choose between 12 or 24 hour clock.
4 Press MODE to confirm your choice and make the hours flash.
5 Press ADJUST to alter the hour making sure if you are in 24 hour mode that you are not 12 hours
wrong!
6 Press MODE to confirm and start the minutes flashing.
7 Press ADJUST to alter the minutes.
8 Press MODE to confirm and start the seconds flashing.
9 Press ADJUST to set the seconds to zero.
10 Press MODE to confirm and start the year flashing.
11 Press ADJUST to alter the year.
12 Press MODE to confirm and start the month flashing.
3