Optimum Time Ultimate Event Instructions Manual page 2

The Endurance Watch has four basic modes.
1. Time of day (hours, minutes and seconds) with date month and year
2. Stop watch with hours minutes and seconds plus time of day (hrs,
mins, secs)
3. Alarm 1 (with time of day display showing) plus optional single hour
stroke
4. Alarm 2 (with time of day display showing)
The display has two rows of digits, the lower row being much larger
than the upper row. In stop watch mode it is possible to have the
display with large stop watch and smaller time displays or large time
and smaller stop watch. It is possible to alternate between these sizes
even when the stop watch is running. The stop watch has the letters
SW before the digits and the time of day has an icon of a clock before it
so that it is clear which row is time and which is stop watch. There is a
minute alarm when the stop watch is running which sounds 3 beeps
every full minute, but if not required this alarm can be easily silenced.
1