Set Operating Mode; Changing The Room Temperature Temporarily; Changing The Room Temperature Permanently; Adapting The Heating System Settings Using The Time Program (Automatic Mode) - Bosch Compress Hybrid 7000i AW Operation Manual

Operation
3.2.3

Set operating mode

Activate automatic mode (with time program)
If manual operation is active:
▶ Press the menu key.
▶ Press the selector to open the Heating/Cooling menu.
▶ Press the selector to open the Operating mode menu.
▶ Highlight the desired heating circuit and press the selector.
▶ Choose auto and press the selector.
▶ Press and hold the d key to return to the standard display.
A pop-up window is displayed and the time program is activated. The
currently valid temperature flashes.
Activating optimised operation (without time program)
If manual operation is active:
▶ Press the menu key.
▶ Press the selector to open the Heating/Cooling menu.
▶ Press the selector to open the Operating mode menu.
▶ Highlight the desired heating circuit and press the selector.
▶ Choose Optimise and press the selector.
▶ Press and hold the d key to return to the standard display.
A pop-up window is displayed and the required room temperature is
shown.
3.2.4

Changing the room temperature temporarily

Retaining automatic mode
▶ Turn and press the selector to set the required room temperature.
The corresponding time slot is displayed differently to the other
time slots.
The change applies until the next switching time in the active time
program is reached.
Cancelling the temperature change:
▶ Turn and press the selector to set the value stored in the time
program.
8
6 720 812 775-03.1O
6 720 812 775-04.1O
0010021418-001
3.2.5

Changing the room temperature permanently

Optimised operation (without time program)
▶ Turn and press the selector to set the temperature.
-or-
▶ Open the Heating/Cooling > Temperature settings > Optimised
operation menu.
▶ Select the desired temperature and confirm or select Heating off
and confirm.
Automatic mode
▶ Open the Heating/Cooling > Temperature settings > Heating,
Setback or Cooling menu.
▶ Set the desired temperatures for each mode and confirm, or select
and confirm for the Heating off setback mode.
▶ Assign the operating modes to the required time slots via the time
program.
3.2.6 Adapting the heating system settings using the time
program (automatic mode)
Open the menu for adapting a time program for the heating system
▶ Open the main menu.
▶ Open the menu Heating/Cooling > Time program > My time
program 1 or 2.
Compress Hybrid 7000i AW – 6721833054 (2020/09)
6 720 812 775-06.1O
6 720 811 136-07.1O
0010008191-001