Setting The Operating Mode; Selecting A Heating Circuit For The Standard Display; Favourite Functions - Bosch Compress 3000 AW Operating Instructions Manual

8 | Overview of the most frequently used functions
4.3

Setting the operating mode

Optimised operation is enabled by default, as this operating mode
ensures maximum efficiency of the heat pump.
Operating the appliance
To activate automatic mode (by taking account of the time program),
▶ Press the menu key to open the main menu.
▶ Press the selector to open the Heating/Cooling menu.
▶ Press the selector to open the Operating mode menu.
▶ If two or more heating circuits are installed, turn the selector to highlight Heating circuit 1, 2, 3 or 4 and press the selector.
▶ Turn the selector to highlight Auto and press the selector.
▶ Press and hold the Back key to return to the standard display.
All temperatures set in the currently valid time program for the heating system are shown in a pop-up window in the lower part
of the display. The currently valid temperature flashes.
The user interface controls the room temperature according to the active time program for the heating system.
To activate optimised operation (without time program)
▶ Press the menu key to open the main menu.
▶ Press the selector to open the Heating/Cooling menu.
▶ Press the selector to open the Operating mode menu.
▶ If two or more heating circuits are installed, turn the selector to highlight Heating circuit 1, 2, 3 or 4 and press the selector.
▶ Turn the selector to highlight Optimise and press the selector.
▶ Press and hold the Back key to return to the standard display.
The required room temperature is shown in a pop-up window in the lower part of the display. The user interface will now
constantly maintain the required room temperature.
Table 5 Getting started – Activating operating modes
4.4

Selecting a heating circuit for the standard display

The standard display only ever shows data for a single heating circuit. If
two or more heating circuits are installed, a setting can be made to
Operating the appliance
▶ When the lighting is turned on, press the selector.
The number, operating mode and if applicable the name of the heating circuit that is currently selected are shown in the lower
part of the display.
▶ Turn the selector to select a heating circuit.
Only heating circuits that exist in the system are displayed for selection.
▶ Wait a few seconds or press the selector.
The standard display refers to the heating circuit selected.
Table 6 Overview – Standard display of heating circuit
4.5

Favourite functions

Via the fav key you have direct access to often used functions for heating
circuit 1. The first pressing of the fav key opens the menu for configuring
the favourites menu. There you can add your personal favourites and if
necessary later adapt the favourites menu to your requirements.
Operating the appliance
To access a favourite function: Open the favourites menu
▶ Press the fav key to open the Favourites menu.
▶ Turn the selector and press to select a favourite function.
▶ Change the settings (procedure is the same as when making a setting in the main menu).
To adapt the list of favourites to meet your requirements: Select favourite functions
▶ Press and hold down the fav key until the menu for configuring the favourites menu is displayed.
▶ Turn and press the selector to select a function (Yes) or to cancel your selection (No).
The changes are effective immediately.
▶ Press the Back key to close the menu.
Table 7 Favourite functions
6 720 818 009 (2015/07)
CLIMATE CONTROL SYSTEMS
determine which heating circuit the data in the standard display relates
to.
The function of the fav key is independent of the heating circuit
displayed in the standard display. Settings changes via the favourites
menu always apply only to heating circuit 1.
VOGEL NOOT
&
Result
6 720 812 775-03.1O
6 720 812 775-04.1O
Result
6 720 812 775-02.2O
Result
6 720 811 136-15.1O
Compress 3000 AW