G E T T I N G S TA R T E D
1.
Remove all packaging.
Take the water tank o of the base and
2.
remove all tape, including any tape on
the float. Figure 1.1
Rinse and reassemble all parts before
3.
first use (see Cleaning, page 15).
Note:
•
Check to make sure that the water filter
is correctly in place. If not, then rotate
the filter clockwise to secure it in place.
Figure 1.2
8
Figure 1.1
Figure 1.2
•
Check to make sure that the float is
securely in place. Figure 1.3
Figure 1.3
Choose a hard, flat location for the
4.
humidifier at least 12 inches / 30 cm
away from any walls. The surface
must be water-resistant. Figure 1.4
12 in /
30 cm
Figure 1.4
5.
Mist should be directed away
from walls, furniture, bedding, and
appliances. Figure 1.5
Figure 1.5
12 in /
30 cm
Need help?
Do you have a question about the VeSync Dual 200S and is the answer not in the manual?