Checking The Projector Status; Storing The Projector - Epson Megaplex MG-50 User Manual

Checking the Projector Status

You can use the Info menu to view information about the current display and how long the
projection lamp has been in use. To access the Info menu:
1. Press the
2. Use the menu navigation buttons to open the
appears:
■
Lamp Hours
■
Source
■
Input Signal
■
Resolution
Note: The information displayed depends on the currently selected image source. The Lamp
Hours shows 0H until you've used the lamp for at least 10 hours.
The resolution indicates the total number of scan lines in the source signal. The number of visible
scan lines depends on the signal format standard and selected display (see page 75).

Storing the Projector

If you need to store the projector for an extended time, do the following:
■
Make sure the temperature of the storage area is within 14 to 140 °F (–10 to 60 °C).
■
Close the lens cover and retract the feet.
■
Close the dock.
■
Remove the batteries from the remote control.
■
Pack the projector in its original packaging or equivalent.
64
Maintenance
button on the remote control.
Menu
menu. The following information
Info
■
Refresh Rate
■
Sync Info
■
Serial Number
■
Status (error information)