Connecting A Microphone; Connecting A Usb Storage Device - Epson Megaplex MG-50 User Manual

Connecting a Microphone

Audio from a microphone can be output from the projector's speakers. To use the
microphone, plug it into the
Note: Set Plug-in Power to On when using a microphone or condenser microphone that
supports plug-in power.
Lowering the value of the Mic Input Level makes the audio input level from other devices higher.
Increasing the value of the Mic Input Level makes it lower.

Connecting a USB Storage Device

You can project the images stored on a USB storage device, such as a USB flash drive or
digital camera, by connecting it to the projector's USB (
Note: This feature is only available on the MegaPlex MG-850HD.
To connect a digital camera, hard drive, or Epson DC-06 document camera, use the USB
cable that came with the device.
Tip: For best results, use a hard drive that meets the following requirements:
■
USB Mass Storage Class-compatible
■
Formatted in FAT or FAT32
■
Self-powered with its own AC power supply
30
Connecting Other Devices
port on the side of the projector.
Mic
) port (MG-850HD only).
TypeA
USB TypeA