Locking The Projector - Epson Megaplex MG-50 User Manual

6. Use the u, d, l, or r buttons to select a zoom factor (display size) and press the enter
button.
7. When the message
the enter button. Saving the logo may take a few moments. Do not use your projector,
remote control, or video source while the logo is being saved.
8. When you see the message
Choosing When to Display the Image
After your image is saved, you can set it to display as the startup screen, the screen you see
when there's no signal, or the screen you see when you press the
1. Press the button on the remote control, highlight the
Menu
the enter button.
2. Select and press the enter button.
Display
3. Choose from these display options:
■
Set
Display Background
■
Set
Startup Screen
■
Set
A/V Mute
button.
4. When you're finished, press

Locking the Projector

The projector includes two lock settings to prevent the image from being accidentally
changed once it's adjusted, and to keep children from turning on the projector without adult
supervision.
To access the lock settings, follow these steps:
1. Press the button on the remote control.
Menu
2. Use the menu navigation buttons to open the
3. Choose from these options:
■ Child Lock
to disable the Ppower button on the projector's control panel unless it is
pressed for about 3 seconds. (You can use the Ppower button to turn it off,
however.) Since you can still use the remote control to turn on the projector, you
may want to keep it away from children's reach.
Save this image as the User's Logo?
, press
Completed
to to display your image when there is no signal.
Logo
to to display your image when the projector is warming up.
On
to to display your image when you press the
Logo
to exit.
Menu
appears, select
to exit.
Menu
A/V mute button.
Extended
menu.
Settings
Using the Projector Security Features
and press
Yes
menu, and press
A/V mute
53