Creating Your Own Startup Screen - Epson EX30 User Manual

note
When you choose an image
for the user's logo, it erases
any previously used image.
You can save an image up to
300 × 400 pixels in size.
Once you have saved a new
user's logo, you cannot
return to the factory default
logo.
Fine-Tuning the Projector
70
If you have forgotten the password, contact Epson with the
■
request code number that appears in the Password screen for
assistance. See "Where To Get Help" on page 96.
■ If you enter an incorrect password 30 times in succession, the
projector remains locked and you must contact Epson to arrange
for service.

Creating Your Own Startup Screen

You can transfer any image from your computer or video source to the
projector and then use it as your startup screen. You can also use it as
the screen displayed when the projector is not receiving a signal or
when you press the
A/V Mute
logo, slogan, photograph, or any other image you want to use.
Capturing the Image
Start by displaying the image you want to use from either a computer
or video source, such as a DVD player or digital camera. Then follow
these steps to capture the image and transfer it to the projector:
1. Press the button on the remote control, highlight the
Menu
menu, and press
Extended
2. Highlight
User's Logo
3. When you see a message asking
, select
User's Logo?
displays over the image.
button. The image can be a company
.
Enter
and press .
Enter
Choose this image as the
and press . A selection box
Yes Enter