Advertisement
Getting Started
a
c
e
f
b
g
d
2
Along with your upright unit, you
will find the following components:
Your Shark Navigator
a
Vacuum Body
is easy to assemble:
b
Floor Power Nozzle
1
Lay your vacuum body on a
c
Handle Assembly
level surface.
d
Super Stretch Hose
2
Slide the electrical connection
from the power nozzle into the
e
Cleaning Wand
main body to click into place.
f
Pet Hair Power Brush
3
Connect the hose from the main
g
Cleaning Attachments
body to the power nozzle; push
*
Note: Optional tools are available for sale
with a slight turning motion to
for any NV26 or NV27 model:
create a snug fit.
1-800-798-7398.
4
TOLL FREE: 1-800-798-7398
4
5
3
7
Upright
4
Slide the handle assembly
®
into the upright unit aligning
the hose hook on the handle
assembly with the power cord
hooks on the back of the unit.
5
Secure the handle assembly in
place with included bolt.
6
Place the vacuum in the upright
position.
7
Store the Crevice Tool, Dusting
Brush and Cleaning Wand on
the unit.
8
c
a
b
8
Attach the Super Stretch Hose:
9
When storing your vacuum,
wind cord around the two cord
a)
Snap hose into swivel
holders and secure with cord
connector
clip:
b)
Route under anti-tip hook
• Quick Cord release at the
c)
Route over upper hose
top of the unit – place in the
holder
upright position.
d)
Press securely onto cleaning
• Second holder near the
wand
base – turn until it is pointing
down.
IMPORTANT:
To prevent vacuum from
To release the cord, turn the Quick
tipping, secure hose under the
Cord release to the left or right.
anti-tip hose hook.
IMPORTANT:
For suction to reach the Floor
Power Nozzle, the Cleaning
Wand and Super Stretch Hose
must be attached securely on
the vacuum body.
9
d
10
To carry the vacuum:
With the unit in the standing
position, lift by the Dust Cup
Assembly Handle (carry handle).
CAUTION: When lifting or
carrying, DO NOT press Dust
Cup Assembly release button.
www.sharkclean.com
5
Hide quick links:
Advertisement
