Page 2
To return your used device, please use the return and collection systems or contact the retailer where this product was purchased. They can take this product for environmental safe recycling. This manual covers model: NV22UKL 26 TECHNICAL SPECIFICATIONS Voltage: 220/240 V., 50Hz Not to be disposed of with other household waste.
Contents Thank you for Important Safety Instructions purchasing Getting Started the Shark ® Using the Vacuum Navigator Cleaning with the Vacuum Accessories Upright Vacuum. Emptying the Dust Cup Assembly Proper Care of Your Vacuum Troubleshooting Checking for Blockages Maintenance...
IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS For Household Use Only WHEN USING YOUR SHARK NAVIGATOR GENERAL ELECTRICAL SAFETY: ® UPRIGHT VACUUM, BASIC SAFETY 1. Unplug from electrical outlet when not in use PRECAUTIONS SHOULD ALWAYS BE and before servicing. FOLLOWED, INCLUDING THE FOLLOWING: 2.
Page 5
GENERAL USE: GENERAL CLEANING: 26. DO NOT run the vacuum over large-sized 16. Use only as described in this manual. objects. 17. Children should be surpervised to ensure that 27. DO NOT pick up hard or sharp objects such as they do not play with the appliance.
Getting Started Along with your upright unit, you will find the following components: Your Shark Navigator Upright ® Slide the handle assembly Handle Assembly is easy to assemble: into the upright unit aligning Cleaning Attachments the hose hook on the handle...
Page 7
To carry the vacuum: Attach the Super Stretch Hose: When storing your vacuum, wind cord around the two cord Snap hose into swivel With the unit in the standing holders and secure with cord position, lift by the Dust Cup connector clip: Assembly Handle (carry handle).
To protect your carpets, the Brush Roll will only turn on when Indicator Light you have pulled the handle back towards you and released the Floor Power Nozzle. Your Shark Navigator Upright When cleaning bare floors: ® IMPORTANT: Vacuum is a versatile tool that Select the “I On”...
Cleaning with the Vacuum Accessories Vacuum Accessories Using the Cleaning Wand: Before cleaning with your accessories: Your vacuum comes with a Super Stand the vacuum into upright Stand vacuum into upright position. Stretch Hose and Cleaning Wand. position. Use one or the other to attach your Secure Super Remove the Cleaning Wand cleaning accessories.
Option A: for Quick Empty: this material before continuing Locate the Dust Cup Door Insert Dust Cup Assembly deep to vacuum; Shark advanced ® release button within the trash inside trash receptacle to contain cyclonic action will sweep the bag and press to release as you dust and debris.
Proper Care of Your Shark Upright Vacuum ® For proper care, consult the table to the right for the maintenance schedule of your Cyclonic Chamber and Filters. Lock vacuum into upright position. Turn vacuum off. Cleaning the Cyclonic Chamber: Remove Dust Cup Assembly.
Troubleshooting WARNING: to reduce the risk of electric shock, the power cord must be disconnected before performing maintenance/troubleshooting checks. www.lakeland.co.uk...
Checking for Blockages Blockages may cause your vacuum to overheat and shut down. If so, clear the blockages, then follow the instructions for Resetting the Motor Thermostat on page 12. WARNING: Never insert sharp objects into any opening to clear an obstruction.
Maintenance Resetting the Motor Thermostat Your Shark Upright Vacuum is ® equipped with a protective Motor Thermostat. If the motor should overheat, the thermostat shuts off the power. Cleaning the Pet Hair Power Brush - Wait 45 minutes for vacuum to cool;...