Troubleshooting - Homa Cadis HBM-1522 Instruction Manual

1. Measuring the liquid ingredients: When measure the liquid, the cup
should put on the horizontal flat surface and viewed at eye level(not on
an angle) to check the degree. If add egg, milk or other liquids, put into
the cup first then add water up to the degree according to recipe. (i.e
total liquid amount is same as recipe's request but water is reduce)
2. Measuring the powder ingredients: Measure the powder
ingredients into the cup then shake it gently until leveling off to read the
degree. Don't shake long time and hardly, or the powder would be too
compact to over measure.
Measuring Tsp: Including tea Tsp and table Tsp.
Tea Tsp (Tsp) use to measure yeast, salt.
Table Tsp (Tbsp) use to measure the sugar and oil.
Hook: Use to pull out the knead blade from the bread.
Hook
Sometimes when put out the bread, kneading blade would stay into
the bread, use the hook to pull out the blade.
TROUBLE SHOOTING
Below trouble shooting only for your reference when during in the use, if appliance has damage, for avoid danger or more
loss, please send to maintenance station or dial advice line for help.
NO. Problem
1 Smoke from
ventilation hole
when baking
2 Bread bottom
crust is too thick
3 It is very difficult
to take bread
out
4 Stir ingredients
not evenly and
bake badly
10
EN: BREAD MAKER | Instruction Manual
Cause
Some ingredients adhere to the heat
element or nearby, for the first use, oil
remained on the surface of heat element
Keep bread warm and leave bread in the
bread pan for a long time so that water is
losing too much
Kneader adheres tightly to the shaft in
bread pan
1.selected program menu is improper
2.after operating, open cover several times
and bread is dry, no brown crust color
3.Stir resistance is too large so that kneader
almost can't rotate and stir adequately
Tea Tsp(Tsp)
Solution
Unplug the bread maker and clean the heat
element, but be careful not to burn you,
during the first use, dry operating and open
the lid.
Take bread out soon without keeping it
warm
After taking bread out, put hot water into
bread pan and immerse kneader for 10
minutes, then take it out and clean.
Select the proper program menu
Don't open cover at the last rise
Check kneader hole, then take bread pan
out and operate without load, if not normal,
contact with the authorized service facility.
Table Tsp(Tbsp)
Hook