Timer Programming - Asus Aaeon UP Xtreme UPX-WHL01 User Manual

OpCode Value
<Record 0x09
On>
<Record 0x0A
Status>
5.1.5

Timer Programming

Command Feature: This feature allows a device (e.g. TV) to set a timer recording on a
Recording Device. For example, it can be used to set timer blocks of a Recording
Device via a TV menu or via an EPG.
The following messages are used for the Timer Programming feature: <Clear
Analogue Timer>, <Clear Digital Timer>, <Clear External Timer>, <Set Analogue
Timer>, <Set Digital Timer>, <Set External Timer>, <Set Timer Program Title>, <Timer
Cleared Status>, <Timer Status>.
OpCode Value
<Clear 0x33
Analogue
Timer>
<Clear 0x99
Digital
Timer>
<Clear 0xA1
External
Timer>
Table Continues on Next Page
CEC Client Installation
Description Parameters
Attempt to [Record
record the Source]
specified source.
Used by a [Record
Recording Status Info]
Device to inform
the initiator of
the message
<Record On>
about its status.
Description Parameters
Used to clear an See <Set
Analogue timer Analogue
block of a Timer>
device. message.
Used to clear a See <Set
Digital timer Digital Timer>
block of a message
device.
Used to clear an See <Set
External timer External
block of a Timer>
device message
Response
Enter 'Recording'
state and start
recording if possible.
Send the initiator
<Record Status>.
Response
Clear timer block if
possible, then
respond with
<Timer Cleared
Status>
Clear timer block if
possible, then
respond with
<Timer Cleared
Status> message
Clear timer block if
possible, then
respond with
<Timer Cleared
Status> message
Supported
Yes
Yes
Supported
Yes
Yes
Yes
36