Remote Control Passthrough - Asus Aaeon UP Xtreme UPX-WHL01 User Manual

OpCode Value
<User 0x45
Control
Released>
<Menu 0x8D
Request>
<Menu 0x8E
Status>
5.1.13

Remote Control Passthrough

Command Feature: This feature is used to pass remote control commands received by
one device (typically the TV) through to another device in the network.
The following messages are used for the Remote Control Passthrough feature: <User
Control Pressed>, <User Control Released>.
Table on Next Page
CEC Client Installation
Description
Indicates that user
released a remote
control button (the
last one indicated
by the <User
Control Pressed>
message)
A request from the
TV for a device to
show/remove a
menu or to query if
a device is currently
showing a menu.
Used to indicate to
the TV that the
device is
showing/has
removed a menu
and requests the
remote control keys
to be passed
though.
Parameters Response
None Update display or
perform an action,
as required.
[Menu May enter or exit
Request the 'Device Menu
Type] Active' state if the
parameter was
"Activate" or
"Deactivate".Send
<Menu Status> to
indicate the
current status of
the devices menu.
[Menu If Menu State
State] indicates
activated, TV
enters 'Device
Menu Active' state
and forwards
those Remote
control
commands,
shown in Table
26, to the initiator.
If deactivated, TV
enters 'Device
Menu Inactive'
state and stops
forwarding
remote control
commands.
Supported
Yes
Yes
Yes
45