Trane SINTESIS ADVANTAGE CGAF Series Installation Operation & Maintenance page 4

General Information
Loose Parts Inventory
Check all the accessories and loose parts that are
shipped with the unit against the shipping list. Included
in these items will be the water vessel drain-plugs,
rigging and electrical diagrams, service literature,
which are placed inside the control panel and/or starter
panel for shipment. If optional elastomeric isolators are
ordered with the unit, they are shipped mounted on
the horizontal support frame of the chiller/heat pump.
The isolators' location and distribution weight diagram
is placed with the service literature inside the starter/
control panel.
Warranty
Warranty is based on the general terms and conditions
of the manufacturer. The warranty is void if the
equipment is repaired or modified without the written
approval of the manufacturer, if the operating limits are
exceeded or if the control system or the electrical wiring
is modified. Damage due to misuse, lack of maintenance,
or failure to comply with the manufacturer's instructions
or recommendations is not covered by the warranty
obligation. If the user does not conform to the rules of
this manual, it may entail the cancellation of warranty
and liabilities by the manufacturer.
Startup MUST be performed by Trane, or an authorized
agent of Trane, to VALIDATE this WARRANTY.
Maintenance Contract
It is strongly recommended that you sign a maintenance
contract with your local Service Agency.
This contract provides regular maintenance of your
installation by a specialist in our equipment. Regular
maintenance ensures that any malfunction is detected
and corrected in good time and minimizes the possibility
that serious damage will occur. Finally, regular
maintenance ensures the maximum operating life of
your equipment. We would remind you that the failure to
respect these installation and maintenance instructions
may result in the immediate cancellation of the warranty.
4
Training
To assist you in obtaining the best use of it and
maintaining it in perfect operating condition over a long
period of time, the manufacturer has at your disposal
a refrigeration and air conditioning service school. The
principal aim of this is to give operators and technicians
a better knowledge of the equipment they are using,
or that is under their charge. Emphasis is particularly
given to the importance of periodic checks on the
unit operating parameters as well as on preventive
maintenance, which reduces the cost of owning the unit
by avoiding serious and costly breakdown.
Refrigerant
The refrigerant provided by the manufacturer meets
all the requirements of our units. When using recycled
or reprocessed refrigerant, it is advisable to ensure its
quality is equivalent to that of a new refrigerant. For
this, it is necessary to have a precise analysis made by
a specialized laboratory. If this condition is not respected,
the manufacturer warranty could be cancelled.
CG-SVX039C-GB