How Do I Reset History Readings; How Do I Set Alerts - La Crosse Technology CA76669 Faqs

Reset History Readings (each reset individually):
• Press the HISTORY button to view individual readings.
• Hold the MINUS button for five seconds to reset the individual value.
HI ALERT LO ALERT
Important:
• Alerts are defaulted to be OFF.
• Leave an alert OFF (disarmed) press the ALERT button to skip setting that alert value.
• The alert icon will show when the alert is active.
• When armed alert value is reached, station will beep 5 times each minute, until out of alert
range. The flashing alert icon will indicate it is a LO or HI alert.
• Press any button to stop the temp alert sound. The alert icon will flash while value is in alert
range.
Set Alerts:
1. Press and hold the ALERTS button 2s to enter alert set mode.
2. Press and release the OUT/+ or – button to turn alert ON/OFF
3. If alert is ON, the alert value is flashing. Use the OUT/+ or – buttons to set. Hold the OUT/+ or
– buttons to scroll quickly.
4. Press and release ALERTS button to move to next item.
5. Leave an alert OFF (disarmed) and press the ALERTS button to skip setting that alert value
6. The alert icon will show when the alert is active.
7. When armed alert value is reached, station will beep 5 times each minute, until out of alert
range.(1 second beep once, sound for 5 seconds, wait 55 seconds and then repeat began to
ring for 5 seconds.)
8. The flashing alert icon will indicate if it is a LO or HI alert.
9. Press any button to stop the temp alert sound. The alert icon will flash while value is in
alert range
Alert Setting Order:
• Outdoor LOW Temperature ON/OFF
• Outdoor LOW Temperature Value -40°F-140°F (-40°C-60°C)
• Outdoor HIGH Temperature ON/OFF
• Outdoor HIGH Temperature Value -40°F-140°F (-40°C-60°C)
• Outdoor LOW Humidity ON/OFF
• Outdoor LOW Humidity Value 10%RH-99%RH
• Outdoor HIGH Humidity ON/OFF

HOW DO I RESET HISTORY READINGS?

HOW DO I SET ALERTS?

11 | P a g e