How Do I Reset History Readings; How Do I Set Alerts - La Crosse Technology S77925V3 Faqs

Viewing order:
• Outdoor HI Temp with Time/Date
• Outdoor LO Temp with Time/Date
• Outdoor HI Humidity with Time/Date
• Outdoor LO Humidity with Time/Date
• Indoor HI Temp with Time/Date
• Indoor LO Temp with Time/Date
• Indoor HI Humidity with Time/Date
• Indoor LO Humidity with Time/Date
• Outdoor Heat Index
• Outdoor Dew Point
Heat Index:
Heat Index combines the effects of heat and humidity. Heat index will be the same number as
the Outdoor Temperature until the outdoor temperature is above 26.7°C (80°F).
Dew Point Temperature:
Dew Point Temperature is the saturation point of the air, or the temperature to which the air
must cool to create condensation. The higher the dew points, the higher the moisture content of
the air at a given temperature. Dew Point is lower than the actual temperature.
Reset History Readings (each reset individually):
• Press the HISTORY button to view individual readings.
• Hold the MINUS button for five seconds to reset the individual value.
HI ALERT LO ALERT
Important:
• Alerts are defaulted to be OFF.
• Leave an alert OFF (disarmed) press the ALERT button to skip setting that alert value.
• The alert icon will show when the alert is active.
• When armed alert value is reached, station will beep 5 times each minute, until out of alert
range. The flashing alert icon will indicate it is a LO or HI alert.
• Press any button to stop the temp alert sound. The alert icon will flash while value is in alert
range.

HOW DO I RESET HISTORY READINGS?

HOW DO I SET ALERTS?

12 | P a g e