Table of Contents
Advertisement
Press the tabs inwards,
and
pull
downwards
firmly to remove the filter.
Clean the filter with a
vacuum cleaner, or wash
in warm water with a
drop
of
washing-up
liquid.
• If the mains lead is damaged, it must be replaced by the manufacturer
or an authorised service centre. If the mains plug needs to be replaced,
proceed as follows:
Earth
(Green
Yellow)
Neutral
(Blue)
Appliance does not operate when switched on:
• There is a 3 minute delay before the compressor starts. This is to
protect the compressor.
Appliance stops operating and "FULL" indicator lights.
• Bucket is full of water - empty the water as shown on page 6. Do not
drink the water (it may be used for watering plants).
• Bucket is not replaced properly. Ensure that the bucket is correctly
aligned with the housing.
• Connect the brown wire to the terminal labelled
Fuse
(13A)
"L".
• Connect the blue wire to the terminal labelled
"N".
• Connect the green/yellow wire to the terminal
labelled with the earth symbol or "E".
• Make sure that the cord-grip is positioned
Live
correctly (over the outer sheath of the cable) and
(Brown)
it fully tightened.
FAULT FINDING
Ensure that the filter is
Page 6
completely
dry
replacing.
before
Advertisement
Table of Contents
