Smeg Classic Manual page 41

Assembling the backguard
The backguard provided is an
integral part of the product. It must
be fastened to the appliance prior
to installation.
The backguard must always be positioned
and secured correctly on the appliance.
1. Loosen the 4 screws (A) on the back of
the cooktop (2 for each side) using a
screwdriver.
2. Place the backguard on the worktop.
3. Align the slots of the backguard (B) with
the screws (A).
4. Tighten the 4 screws previously
loosened.
5. Use the 3 supplied screws to fix from
above the backguard to the cooktop.
Installation
Installing the front plinth
The front plinth must always be positioned
and secured correctly on the appliance.
1. Use a screwdriver to remove the front
screws under the storage compartment
door.
2. Align the front plinth with the
corresponding holes on the appliance.
3. Fasten the front plinth using the screws
that were previously removed.
43