Cutting The Roll Paper Or Printing Page Lines - Epson Stylus Pro 4880 User Manual

Note:
If you press the
position immediately.
10. Close the roll paper cover.
11. Extend the paper tray and paper tray cover according to the paper size.
Now the printer is ready to print. While the printer is printing, do not open the
top cover. If the top cover is opened while printing is in progress, the printer
stops printing, and then restarts printing when the top cover is closed.
Stopping and restarting printing may reduce the print quality.
Caution:
c
Do not leave paper in the printer for a long period of time; its quality will
deteriorate. Epson recommends that you remove the paper from the printer
after printing.

Cutting the roll paper or printing page lines

When your print job is finished, the printer cuts the roll paper automatically or
prints page lines around the printed data according to your settings. You can
make these settings using the control panel or printer software.
Note:
❏ Printer driver settings usually override the control panel settings. Use your printer
driver settings whenever possible.
❏ When the printer cuts the printout, it may take a little time to proceed with cutting
after printing is finished.
pause button, the printer starts to feed the paper to the printing
149
Paper Handling