Epson Stylus Pro 4880 User Manual page 199

❏ Make sure the interface cable is directly connected to the computer without
passing through any device, such as a printer switching device, or
extension cable.
Your Epson printer is not selected as the default printer
Install the printer driver if it is not installed yet (see the Start Here sheet for
instructions), and follow the steps below to select your Epson printer as the
default printer.
For Windows Vista
1. Click , Control Panel, and click Printer under Hardware and Sound.
2. Right-click EPSON Stylus Pro 4880.
3. Select Set as Default Printer, then close the window.
For Windows XP
1. Click Start, Control Panel, Printers and Other Hardware, and then
Printers and Faxes.
2. Right-click EPSON Stylus Pro 4880.
3. Select Set As Default Printer, then close the window.
For Mac OS X
Make sure that the printer driver Stylus Pro 4880 is correctly added to the
Printer Setup Utility, and the correct printer is selected in the Printer Setup
Utility.
199
Problem Solver