Epson Stylus Pro 4880 User Manual page 82

4. Specify the width of the binding margin in the Binding Margin text box. You
can specify any width from 0.12 to 1.18 in. (3.0 to 30.0 mm). The specified
margin width will be used on both sides of the fold. For example, if you
specify a 0.39-in (1-cm) margin, the printer will leave a 0.79-inch (2-cm)
margin in the center (0.39 in. [1.0 cm] will be placed on each side of the
fold).
✽ Folding Edge
✽✽ Margin
5. Click OK to return to the Page Layout tab, and then click OK to save your
settings.
6. Make sure paper is loaded, and then send a print job from your application.
7. You will see instructions for printing the inside pages while the outside
pages are being printed. Follow the on-screen instructions to reload the
paper.
Note:
❏ The paper may curl during printing due to the amount of ink used. If this
happens, slightly curl the sheets in the opposite direction prior to reloading
them into the printer.
❏ Align the stack of sheets by tapping them against a hard, flat surface prior to
reloading them into the printer.
❏ Follow the on-screen instructions provided when reloading the printed pages.
Paper jams or improperly placed binding margins may occur if the pages are
not reloaded correctly.
82
Printing with Windows