Delivery And Installation; Usb Interface; Supported Connections - Epson Stylus Pro 7000 Series Product Information

EPSON Stylus Pro 7000 series
ECP mode
Transmission IEEE-1284 ECP mode
mode
Adaptable 57-30360 Amphenol connector or
connector equivalent
Synchronization Refer to the IEEE-1284 specification
Handshaking Refer to the IEEE-1284 specification
Signal level IEEE-1284 Level 1 device
Data Refer to the IEEE-1284 specification
transmission
timing

USB interface

Standard Based on Universal Serial Bus Specifications
Revision 1.0, Universal Serial Bus Device
Class Definition for Printing Devices
Version 1.0
Bit rate 12 Mbps (full speed device)
Data encoding NRZI
Adaptable USB Series B
connector
Recommended 6 feet (2 meters)
cable length
Parallel interface Compatible (on Printer Setting menu)
mode setting

Supported Connections

Win Win
Connection 95 98
Parallel X X
USB X*
Ethernet X X
FireWire
* Supported on pre-installed operating systems, not upgraded from
earlier versions of Windows.
4 - EPSON Stylus Pro 7000 series
Win Win Standard/
NT 2000 Mac optional
X X standard
X X standard
X X X otional
X X optional
Drivers
Macintosh ® System 8.5.1 or later, Windows
98, Windows 2000, and Windows NT 4.0. Raster drivers are
®
standard. For Adobe
EPSON RS-5100 Fiery
software solution.

Delivery and Installation

Package size for delivery (not including optional stand):
width: 51.2 inches
depth: 30.5 inches
height: 27.8 inches
weight 132 lb
Make sure you allow adequate space for easy operation,
maintenance, and ventilation, as shown in the following
illustration:
10 in.
34 in.
8/00
® 95, Windows
®
PostScript support, use the optional
® X2 Printing System or a third-party
47 in.
12 in.
31 in.
10 in.
20 in.
48 in.
6 in.