Epson Stylus Pro 7000 Series Product Information page 3

Ink Cartridges
Print yield Approximately 28 pages/A1
(720 dpi, 40% duty)
Approximately 3,800 pages/A4
(360 dpi, 5% duty); print yield may vary,
depending on how often you run cleaning
cycles and how much you use the printer;
yield of the initial cartridge set is reduced
because of ink charging
Cartridge life:
EPSON Stylus 2 years from production date
Pro 7000 ink
EPSON Stylus Within 6 months after opening package, at
Pro 7500 ink 77 °F (25 °C)
Temperature:
Storage 22 to 104 °F (
–
(uninstalled) 1 month at 104 °F (40 °C)
Storage 4 to 104 °F (
–
(installed) 1 month at 104 °F (40 °C)
Transit 22 to 140 °F (
–
1 month at 104 °F (40 °C)
120 hours at 140 °F (60 °C)
Freezing 14 °F ( 10 °C) ink thaws and is usable after
–
at least 3 hours at 77 °F (25 °C)
Dimensions Width: 0.99 inches (25.1 mm)
Depth: 5.6 inches (141.1 mm)
Height: 4.15 inches (105.3 mm)
Weight Approximately 0.44 lb
(200 g)
Capacity 3.7 oz (110 ml)
30 to 40 °C)
–
20 to 40 °C)
–
30 to 60 °C)
–
EPSON Stylus Pro 7000 series
Interfaces
Parallel interface
The built-in parallel interface supports compatibility and ECP
modes.
Compatibility mode
Forward channel
Data format 8-bit parallel, IEEE-1284 compatibility
mode
Synchronization
STROBE
Handshake
BUSY
timing
Signal level TTL compatible
Connector 57-30360 Amphenol connector or
equivalent
Reverse channel
Transmission IEEE-1284 Nibble mode
mode
Adaptable 57-30360 Amphenol connector or
connector equivalent
Synchronization Refer to the IEEE-1284 specification
Handshaking Refer to the IEEE-1284 specification
Signal level IEEE-1284 Level 1 device
Data Refer to the IEEE-1284 specification
transmission
timing
8/00
pulse
and signals
ACKNLG
EPSON Stylus Pro 7000 series - 3